Private Treaty Sale
Sale of Surplus Assets on Behalf of Centrica Storage Ltd


Location:
Hull, UK

Inspections:
By appointment only.

Disclaimers:
Lots are being sold "as is, where is". We recommend that you contact a sales representative to set up an inspection.

Air Compressors
(2) Comp Air D110RS – 10A (YOM 2012)

•Air cooled
•Motor rating: 110kW
•Working pressure: 4 – 10 Bar
•Free air delivered: 10.51 to 17.68m3 per minute
•Unit one: 15,000 indicated operating hours serial no: CD10009807002
•Unit two: 20,000 indicated operating hours serial no: CD10009807001


(1) Skid mounted CompAir L37RS oil lubricated packaged air 3 compressor (YOM 2013)

• 400V
• 3 Phase
• 50Hz
• 37kW motor
• Delcos XL control
• Indicated running hours at time of inspection 1085
• Serial no: CD10013489001
• with Walker Filtration Prodry dessicant dryer

Wirac Automation dew point control and Abbott & Co 875 Litre Vertical Air Receiver tank.

(3) Steel welded vertical air receiver tanks

2 x CompAir ‘A170xs’ heatless dessicant dryers


Kenz-Figee Offshore Crane
Kenz-Figee model 60/3000 offshore diesel hydraulic lattice boom
luffing pedestal crane (YOM 2016)

•Unused and held in preservation with the original manufacturer
•FAT (Factory Acceptance Test) completed 2017
•Optimum lifting capacity (main hoist) 56Te
•Optimum lifting capacity (aux hoist) 13Te
•Working radius (aux hoist) 43m
•Working radius (aux/main hoist) 8.0m
•Fitted with Caterpillar type C18 DI-TA SCAC (wet manifold and turbo)
6 cylinder four stroke diesel engine
•Classification to ATEX Zone 2, gas group 11A, temp class T3
•Fitted with fail-safe breaking system and derived dynamic coefficients
in accordance with EN 13852-1 as well as additional cameras and fire
and gas detectors.


Gas Compression Train
(1) Dresser-Rand feed gas compression train (YOM 2016)

•Zero operating hours
The plant has never been installed or commissioned, in its original
condition as delivered by the original manufacturer
•Plant is being sold with a complete set of insurance spares
•Manufacturing engineering drawings are also available
•Compression train includes the following components:
(1) centrifugal compressor model D4R8S
(1) speed-increasing gearbox
(1) Induction type variable speed motor
(1) dedicated variable frequency drive system
(1) on-skid mounted gas seal panel
(1) on-skid mounted dedicated lube oil system
(1) off-skid fin fan cooler for the lube oil system
(1) Local Equipment Room – Container Type
•The train components are arranged in the following configuration: Motor + ear + D4R8S.


For further details and additional photographs contact:

Tom Hutchinson
Tel: 07774 652425
Email: tom@ahassetsolutions.com

Jude Pendragon
Tel: +234 (0) 81424 89525
Email: judeop@indassol.com

Nigel Naden
Tel: +44 (0) 1625 820212
Email: naden@indassol.com

 
View Brochure
 
 
   

Sale held in conjunction with:

Partner company name